Flotation Machine

Effective Volume: 0.35-20 m³

Scope of Application: nonferrous metal, coal translucent stone, talc, etc.

Processing materials: copper zinc, lead, nickel, gold and other non-ferrous metals, ferrous metals, non-metals, coal translucent stone, talc and other materials.

The flotation machine is mainly used to select metal minerals such as gold, silver, copper, iron, lead, zinc, molybdenum, nickel and aluminum. Can also be used for the selection of ferrous and non-metallic. The machine is driven by the motor's V-belt drive to rotate the impeller, which generates centrifugal force to form a negative pressure. On the one hand, it sucks in sufficient air to mix with the slurry. On the one hand, the slurry is stirred into a drug mixture, and the foam is refined to make the mineral bond foam the float to the surface. The mineral slurry forms a mineralized foam. Adjust the height of the gate to control the liquid level so that the useful foam is scraped off by the scraper.

Flotation Machine Instructions:

Before starting the machine, check the bolts of each part first. Before starting the machine, manually rotate the pulley to prevent the sediment from accumulating the increase the load of the motor. When working, carefully adjust the height of the gate to keep the liquid level stable and keep the ore on the slurry surface. The foam is scraped into the launder. The impeller and stator should be kept at a certain distance. When worn, care should be taken to replace them. The bearings in the pump should be serviced once every three months.